9
8
Quick Start Guide
Turning the heater ON
Ensure that the heat setting
control dial is set to the
'OFF' position.
Plug the power cord into a
230V or 240V power point and
switch on.
Setting the heating mode (KFH710 and KFH770 only)
Turn the thermostat control to the
'MAX' position.
Turn the heat settings control to
the desired heat setting mode; '1'
Low (1200W), '2' High (2400W) or
fan only mode.
Setting the variable thermostat control
(KFH710 and KFH770 only)
Turn the heat control to setting ‘2’
and turn the thermostat control
to the ‘MAX’ position to set the
heater into high heat mode.
Once a comfortable room
temperature has been reached,
slowly turn the thermostat control
towards the ‘MIN’ setting until
a click sound is heard. The
heater will now cut in and out to
maintain the room temperature.
Setting the oscillation
(KFH770 only)
Turning heater OFF
This function will work in any
mode. Switch the ‘SWING’ button
to ‘I’ to activate. This will allow
the heater to oscillate back and
forth. To stop the unit oscillating,
switch the ‘SWING’ button to ‘0’.
Turn the heat control dial to the
‘OFF’ position, turn off at the
power outlet and unplug from
the outlet.
