manualshive.com logo in svg
background image

7

Operating Instructions

Before First Use

Remove any packaging materiel and 

promotional labels before using your 

kettle for the first time.
It is recommended that before first 

use to fill to the kettle to the maximum 

level with cold tap water, bring to the 

boil and discard the water. 
Your kettle will only operate when 

positioned on the power base with the 

ON/OFF switch in the “ON” position.
The kettle will automatically switch 

“OFF” once the water is boiled.

Operation of Your Kettle

1. 

To fill the kettle, remove it from the 
power base and open the lid by 
pulling up. 

(see Fig. 1) Fill with the desired 

amount of water. Never fill the 

kettle above the ‘MAX’ mark, 

which is indicated on the water 

window. Too little water will result in 

the kettle switching “OFF” before 

the water has boiled.

NOTE:

 Never operate the kettle 

dry – too little water will results 

in the kettle switching “OFF”.

NOTE:

 Do not fill above the MAX 

mark on the water window as 

boiling water may splash out 

from the kettle.

2. 

Ensure that the lid is closed and 
locked firmly into place before 
placing the kettle on the power 
base.

3. 

Place the kettle firmly onto the 

power base. Plug the power cord 

into 230V or 240V power outlet 

and switch ‘On’.

NOTE:

 This kettle must only 

be used with the power base 

supplied. Use caution when 

pouring water from your kettle 

as boiling water will scald. Do 

not pour the water too quickly.

4. 

Press the On/Off switch to the ‘ON’ 
position. The power ‘ON’ light will 
illuminate.

5. 

The Kettle will automatically switch 

‘OFF’ once the water has boiled. 

Lift the kettle from the power base 

and pour the water. Take care to 

hold the kettle level, especially 

when filled to the maximum level. 

To re-boil it may be necessary to 

wait for a few seconds to allow 

the control to reset.

NOTE:

 Do not remove the kettle 

from the power base during 

operation. Ensure the kettle has 

switched to “OFF” position after 

the water has boiled before 

removing the kettle from power 

base.

Lift the kettle from the power base 
and pour the water. 

WARNING:

 This 

appliance is designed 

for the boiling of water 

only, never use it to heat 

or boil any other liquids 

or foodstuff. The lid 

should always be firmly 

in place when using.

KSK65_IB_FA.indd   7

18/11/09   9:35 AM

Содержание KETTLE KSK65













Отзывы: