8
Removable Wire Oven Rack
Always place the wire oven rack
into the top, middle or bottom rack
support guide in an upward rack
return position. This offers three rack
height positions.
Fig. 1
Using the Top Element
for Grilling
Grilling is a fast way of cooking foods
such as steak, lamb chops and
sausages, as well as making toasties.
1.
Ensure that the mini oven is on a
dry, level, heat resistant surface.
Make sure that the power outlet is
switched off and that the mini oven
is unplugged from the power outlet.
2.
Open the glass oven door and
position the wire rack into the top
rack support guide inside the oven
in an upward rack return position.
3.
Select on the element
selection dial.
4.
Select the desired temperature
according to the recipe on the
temperature control dial.
5.
Plug the mini oven into a 230V or
240V power outlet and switch the
power outlet on. The heating light
will illuminate.
Using Your Mini Oven
continued
6.
For grilling, place the food on the
baking tray, and place inside the
oven and onto the wire oven rack.
Ensure that a separate timer is
now activated if required in order
to measure cooking duration.
NOTE:
The mini oven does
not have an inbuilt timer, so a
separate timer will be required.
7.
Leave the door slightly ajar,
leaving a minimum 50mm gap at
the top, rear and all sides of the
oven. This will ensure adequate
airflow during grilling.
8.
Monitor the cooking to check if
the food needs to be turned.
9.
When grilling has finished, remove
the baking tray with oven mitts,
and place the baking tray on a
heat resistance surface.
Using the Bottom Element for
Re-Heating
Re-heating allows pre-prepared meals
to be enjoyed as they were intended
to be.
1.
Ensure that the mini oven is on a
dry, level, heat resistant surface.
Make sure that the power outlet is
switched off and that the mini oven
is unplugged from the power outlet.
2.
Open the mini oven door and
position the wire oven rack in the
bottom or middle rack support
guide in an upward rack return
position, depending on the height
of the pan used.
3.
Select the element on the
element selection dial.
KOT630_IB_B11_FA.indd 8
11/07/11 11:57 AM
