7
Operating Instructions
Before First Use
Remove any promotional material
from the vacuum cleaner.
When unpacking the vacuum cleaner
check to see you have received all
the required components, such as the
hose and other accessories before
discarding the packaging.
To Operate the
Vacuum Cleaner
Locate the crush proof hose and
push the connection point into the
hose inlet connection on the front
side of the vacuum, until a “click”
sound is heard.
Connect the wide end of the metal
wand to the hose end, and push
together firmly.
Fit the floor tool to the narrow end of
the wand and push together firmly.
Fully extend the power cord by pulling
the power plug out from the rear of
the vacuum, until the yellow tape on
the cord is showing.
NOTE:
Ensure that you do not
over extend the power cord
– do not extend past the red
warning tape on the cord.
Plug into a 230V or 240V power point
and switch the power on at the
power point.
To commence vacuuming, push
down on the on/off button
on/off
cord
press
& lift
up
down
on the
top of the vacuum cleaner.
When vacuuming is complete, push
down on the ‘on/off’ button to
switch off. Turn the power off at the
outlet and then remove the power
cord from the power outlet. When
removing the plug from the power
outlet, grasp the plug not the cord.
To retract the cord push down on the
‘cord rewind’ button
on/off
cord
press
& lift
up
down
on top of the
vacuum cleaner.
IMPORTANT:
Hold the
plug end and guide the
cord into the vacuum
during retraction to
prevent it from striking
you or the vacuum.
CAUTION:
Always
ensure that the dust
container and the
motor protection filter
are correctly fitted.
Never operate without
the dust container or
filters in place.
Fig. 1
Fig. 2
