![background image](http://html1.mh-extra.com/html/kambrook/captivg3pet-kbv420/captivg3pet-kbv420_instruction-booklet_651702011.webp)
10
Check all filters and replace them
regularly. It is recommended to clean
the filters after every use. For normal
household vacuuming the filters should
be replaced at least twice a year.
If you encounter reduced vacuum
cleaner performance, check:
• Dust capacity in dust container
• All filters, including dust, motor and
exhaust. Any clogging in the filters
will reduce the efficiency of your
vacuum cleaner
To clean the outside of the unit, wipe
the exterior with a soft, damp cloth.
Never use an abrasive cleaner.
Emptying the Dust Container
Always switch the vacuum off, then
switch off at the power outlet and
unplug prior to replacing filters or
emptying the dust container.
For optimum use, the dust container
should be emptied after every use.
When the dust container reaches the
capacity mark ‘MAX’, it is essential
to thoroughly clean both the dust
container and filters.
To remove the dust container, ensure
the vacuum is down on its wheels;
remove the dust container by pressing
down on the button on top of the dust
container. Once released carefully lift
the container upwards.
Fig. 8
Care and Maintenance
Fig. 9
To empty the dust container simply
place it over the rubbish bin, ensuring
the opening of the bin is larger than
the dust container. Press the “PUSH”
button located beneath the hose
inlet connection on the front of the
dust container. The bottom of the
container will release and the dust
and compiled dirt will be dispensed.
Fig. 10
NOTE:
Dependant upon
the amount and type of dirt
collected in the dust container, it
may be necessary to agitate the
dirt inside the dust container for
easier dispensing.
IMPORTANT:
Do not use
the unit without a dust
container in place.