ASSEMBLY INSTRUCTIONS
STEP 2:
The 3x bracket (2) to brace ring(1) using the 3x screws(A) with the 3x dome headed nuts(B).
Then using the 3x screws(A) with the 3x dome headed nuts(B) for step 1.
STEP 3:
To attached the 2x handles(5) to the lid of the brace ring(1), start by aligning the bolts hole of
the handles to pre-installed bolts on the lid. Secure the handle(5) with the 2x pre-attached dome headed
nuts.
STEP 4:
Place the Kamado grill on the cart with the bottom vent facing to the front of the cart allowing
the vent to open and close without any interruption.