7
WSMANUAL 0114
I N S TA L L AT I O N C O N T I N U E D
WIRING
1. Place Weight Scale(s) in Sample Receiver Housing
and adjust feet by screwing them in or out (Fig. 3-2)
to ensure that the scale is complete stable and does
not rock.
2. Mount Weight Scale Controller(s) within 6' – 8' (2 –
2.4 M) of housing.
3. Connect the Scale and the Scale Controller with
the supplied 10' wire using quick connects.
WARNING: The KAM Weight Scale has mechanical
stops to prevent damage from overweight receivers.
HOWEVER, placing receivers above the maximum
weight or slamming receivers down onto scale will
result in damage to the scale.
1. Remove cover from Weight Scale Controller by first
removing set screw on the bottom of cover (see Fig.
3.3) and then turning cover counter clockwise.
2. Remove LCD display plate by first removing the (3)
4-40 screws. See Fig. 3.4.
3. Life the display plate up for easier access, then
disconnect the LCD cable.
Adjustable feet
FIG. 3-2
FIG. 3-3
Set screw
FIG. 3-4
4-40 Screws
LCD Cable
