LRWMANUAL 0321
KAM CONTROLS, INC.
22
K A M L R W O P E R AT I O N R E A LT E R M C O N T I N U E D
OUTPUT DATA
An RS232 cable for connecting your PC to the LRW has been supplied with the LRW along with a USB-to-serial
converter in case your computer does not have an RS232 serial port. Go to https://www.kam.com/documentation/ and
download the file "RS232 Driver" from the "Software" section. Once downloaded, unzip the file, double-click on the
executable file (.exe) and follow on-screen instructions to install.
Before proceeding, install and configure RealTerm as per instructions on pages 19–21 of this manual. Ensure your
PC is connected to the LRW sensor via the supplied RS232 serial cable and USB-to-serial converter as per wiring
diagram on page 12. To access the boards, unscrew the cover from the Explosion Proof electronics enclosure,
unscrew the LCD Display plate and carefully unplug the LCD connector.
Follow the steps below to view output data.
1.
Launch RealTerm and turn on power to the LRW. The initial message will only appear once the unit is powered up
and after all the connections and configurations are made. If the LRW was already on, the message won't display.
FIG. 4-5.
FIG. 4-5
