This timer remote is removable from the main machine unit and can be connected via an extension lead.
Locating socket for control panel is beneath the remote control unit. (This control cable is used when the
control panel is removed from the unit to be used in different location, connect 1 end to the smoke
machine and the other end to the rear of the control panel). When the timer remote is in use the LED will
flash, indicating that a run time has been set.
To use the timer remote control functions.
The red smoke button (4) must be in the off position.
This may be used while fitted into the body of the smoke machine or when connected to the supplied
external control cable.
Remote receiver
The 4 channel switches on the remote control receiver correspond with the buttons on the keyless remote
control
i.e. by selecting switch 1 on the receiver, the smoke machine will operate on button number 1 on the
cordless remote control
Please note
Being a 4 channel keyless remote control, several of these units can be operated via one remote control,
either 4 separate units (1 per button) or by setting the receiver buttons to the same number and assigning
them to just one button on the remote (all machines set to 1 will operate when button 1 on the keyless
remote is pressed).
Remote Transmitter
A - Keychain hook
B - Sliding button cover
C - Operating buttons 1-4
D - Telescopic aerial
