Kam DMX Star Cluster 3D
Three dimensional DMX laser effect
INTRODUCTION
Thank you for purchasing the Kam DMX Star Cluster 3D. To optimise the performance of this product, prior to use,
please read these operating instructions carefully to familiarise yourself with the basic operations of this unit. The
Kam DMX Star Cluster 3D is ground breaking laser effect that will excite both you and your audiences alike. Please
keep these instructions in a safe place for future reference. This unit has been tested in the factory before being
shipped to you. There is no assembly required.
WARNINGS
To prevent or reduce the risk of electrical shock or fire, do not expose this unit to high temperature, rain
or moisture.
Laser Class 3B product. National regulations must be adhered to at all steps of installation. (In Germany apply
DIN 56912 and BGVR LASER. Note: additional regulations may apply).
Unintended reflections of the laser beam from reflective or metallic surfaces can be dangerous.
Visible and invisible laser light direct beams can damage the human eye, do not look at any laser light directly.
When cleaning the laser aperture, please use a soft cloth.
There are no serviceable parts in the laser please have all servicing and adjustments made by a qualified
service engineer
This appliance is to used by qualified personnel only.
LASER RADIATION WARNING
This unit uses diode lasers in green and red. This is CLASS 3B laser product. Avoid exposure to eyes. Never open
the laser diode box, please refer unit to a qualified engineer for servicing or repairs.
FEATURES
Bright red and green laser
Red Laser: 100mW@650nm / Green laser: 40mW @532nm
Built-in high speed stepping motor
High-efficiency optical system
Compatible with the international standard DMX512 signal
Revolves through the effect lens to create grid style laser
Input power: AC 220~240V 50/60Hz
Power consumption: Max. 30VA
Operating temperature: 20°C to 35°C
Storage: -20°C to 80°C (keep in a dry space for indoor use only)
UNPACKING YOUR NEW KAM PRODUCT
1. Carefully inspect your laser as you unpack it. If any damage is evident, please notify the supplier you purchased
the unit from immediately. For safety reasons do not use the unit if any damage has occurred during
transportation.
PACKING LIST
1 x laser show system
1 x AC plug cord
1 x DMX signal cable
1 x user instruction manual
2
