DMX 512 MODES
1. Whilst connected to an international standard DMX512 controller -
2. Set the 10th dip switch to the OFF position.
3. Set the 1st to 9th dip switches as per the laser’s original address (Max: 255).
4. The machine has 5 controlling channels, its channels are distributed as listed below.
Channel
DMX512 value
Description
Channel 1 - Mode
0-69
Laser off
70~139
Sound control mode
140~209
Auto run mode
210~255
DMX512 mode initiates other DMX control channels
Channel 2 - Rotation
0~130
Clockwise
131~255
Anticlockwise
Channel 3 - Speed
1~255
10 level speed (from slow to fast)
Channel 4 - Flash
0-255
10 level speed (from slow to fast)
Channel 5 - Colour
0-69
Red laser
70~139
Green laser
140~255
Red and green laser
MASTER SLAVE MODE (NO CONTROLLER)
Link two units together by setting one of the units (the Master) to ‘sud’, then set the Slave unit’s dipswitches to
10+2, this will display 000 in the LED display. Link the units using a DMX cable (3pin XLR to 3 pin XLR).
Please note this feature is only available on units with a serial number after 8115501. This feature was not
available prior to this serial number.
4
For the latest product updates and information on the entire Kam range visit:
www.kam.co.uk
Kam products are manufactured by:
Lamba plc
, Unit 1, Southfields Road, Dunstable, Bedfordshire, United Kingdom LU6 3EJ
Telephone: (
+44
) (
0
)
1582 690600
• Fax: (
+44
) (
0
)
1582 690400
• Email:
• Web:
www.lambaplc.com
©
C
O
P
Y
R
I
G
H
T
L
A
M
B
A
p
l
c
2
0
0
8
.
E
&
O
E
.
