Copies of the I/B. Please reproduce them without any
changes except under special instruction from Team
International USA. The pages must be reproduced and folded
in order to obtain a booklet A5 (+/- 148.5 mm width x 210 mm
height). When folding, make sure you keep the good
numbering when you turn the pages of the I/B. Don’t change
the page numbering. Keep the language integrity.
Print only
what is inside the frame.
10
FT 36673 - 120501
Assembly page 10/40
Fax +1 305 430 9692
•
Do not use strong detergents or abrasive cloths/liquid, as this will
damage the deep fryer.
•
To clean the lid and filters, remove the filters by removing the filter
cover. 2 filters are included. Wash in warm soapy water and rinse
thoroughly. Allow the filters to dry completely, and replace in lid.
The white filter (cloth filter) shall be placed in the lid first, then the
black filter (charcoal filter). Snap the filter cover back in place
when done.
•
Thoroughly dry all parts of the appliance after cleaning.
•
Change the oil regularly.
•
To re-assemble, follow the section ‘Assembling the deep fryer’.
NOTE:
You may notice a slight discoloration of the parts, when you
choose to use the dishwasher. This will not affect the performance.
STORAGE
•
Wait until the deep fryer is completely cool before storing.
•
The unit can be stored with the oil inside. Ensure the lid is tightly
closed to avoid dust getting into the oil.
TROUBLESHOOTING
Problems
Solutions
Appliance does not work.
Make sure the appliance is
plugged into the mains; make
sure the plug is powered; check
the assembly of the control box
(red safety switch on the front of
the control box needs to be
pressed); make sure the
magnetic cord is well connected
to control box and the wall
outlet.
Machine stops running
suddenly or does not restart
Make sure the magnetic plug is
well connected to control box;
Appliance may have
overheated. Please follow
instructions indicated under
“
Safety Cut Off Thermostat
”
