Copies of the I/B. Please reproduce them without any
changes except under special instruction from Team
International BELGIUM. The pages must be reproduced
and folded in order to obtain a booklet A5 (+/- 148.5 mm
width x 210 mm height). When folding, make sure you
keep the good numbering when you turn the pages of
the I/B. Don’t change the page numbering. Keep the
language integrity.
5
151019
Assembly page 5/8
Fax +32 2 359 95 50
Always ensure that the calibrated glass mixing jug is tightly
sealed with the plastic lid and that the additional ingredient inlet is
locked when in use.
Always close and hold the lid of the calibrated glass mixing jug
before starting to blend. In case the lid loosens during operation,
unplug the appliance and remove the lid to release built-up
pressure. Ensure that you replace the lid prior to resuming
blending.
The appliance is designed for the preparation of small quantities
of food. It is not designed for the preparation of large quantities at
once.
Do not touch the blades while the appliance is operating and do
not try to block their movement in any way. Do not use any
additional mixing implements to assist the blending.
Do not use the appliance without any food in it.
(*) Competent qualified electrician: after-sales department of the
producer or importer or any person who is qualified, approved and
competent to perform repairs in order to avoid all danger. If
necessary you should return the appliance to the electrician.
IMPORTANT INFORMATION
This appliance is not for professional use. You should follow the requested breaks. Failure to
follow this instruction carefully may result in damage to the motor. Please refer to the rating
label for the maximum continuous usage time (KB xx min where xx is the maximum usage time).
The breaks should last at least 10 minutes.
BE CAREFUL!
Your appliance is fitted with a security device on the calibrated glass mixing jug allowing the
functioning of the appliance only when the jug is correctly placed on the motor base. If those
conditions are met and the appliance does not start, call your after sales service.
OPERATIONAL USE
If the blade is disassembled from the bottom of the jar, check the cleaning section for
mounting instructions before continuing.
•
Assemble the calibrated glass mixing jug on the motor block. You should place the symbol
▼
on the calibrated glass jug plastic base in front of the opened padlock
on the motor
unit and then screw the calibrated glass jug to the motor unit so that the closed padlock
ends up in front of the symbol
▼
. To check if it has been done correctly, it should be
possible to raise the motor block with the handle of the calibrated glass mixing jug.
•
Remove the lid of the blender.
•
Fill the calibrated glass mixing jug with the chosen ingredients.
•
Close the lid.
•
Ensure the switch is at ‘0’ on the speed control rotary dial.
