Copies of the I/B. Please reproduce them without any
changes except under special instruction from Team
International BELGIUM. The pages must be reproduced
and folded in order to obtain a booklet A5 (+/- 148.5 mm
width x 210 mm height). When folding, make sure you
keep the good numbering when you turn the pages of
the I/B. Don’t change the page numbering. Keep the
language integrity.
4
151019
Assembly page 4/8
Fax +32 2 359 95 50
Never move the appliance by pulling the power cord. Make sure
the cord cannot get caught in any way. Do not wind the cord
around the appliance and do not bend it.
Always unplug the appliance from the power supply when it is not
in use, especially if you leave the appliance unsupervised or if
you assemble or disassemble it or before cleaning it.
Only blend consumable food, and do not use the appliance for
mixing paints or other flammable liquids or in a place
contaminated with flammable gases or vapours.
It is absolutely necessary to keep this appliance clean at all times
as it comes into direct contact with food.
Make sure the appliance is unplugged before inserting, removing
or cleaning the calibrated glass mixing jug.
Do not allow the cord to hang over the edge of table or counter, or
touch hot surfaces.
Do not place the unit on or near to a gas or electric burner or a
heated oven.
The calibrated glass jug should be mounted correctly on the
motor base before you plug the appliance into the mains power
source. The appliance is equipped with a safety switch, which
prevents the calibrated glass mixing jug from working if incorrectly
mounted.
Avoid contact with moving parts. Keep hands, hair, clothing as
well as spatulas and other utensils away during operation to
prevent injury and / or damage to the appliance.
Do not insert any non consumables into the calibrated glass jar
when the product is in use.
The use of attachments or accessories not recommended or sold
with this appliance may result in fire, electrical shock or injury.
Ensure that the unit is switched off and unplugged after use.
Make sure that the motor has stopped completely before
disassembling.
Attention: the blades are sharp and therefore it is necessary to
take particular precautions when using or cleaning. Be careful
when removing the blade unit from the motor base and always
wear gloves when cleaning the blades.
Do not use abrasive cleaners or scouring pads on appliance.
Do not put any hot liquids into the appliance.
Do not remove the blade unit from the blade positioning ring.
