Kalor Mignon 6, Инструкция по установке и эксплуатации

Страница: 8 / 25

31
GB
AL C AL F
Control board
AL C AL F
1
5
6
7
9
4
2
8
11
10
3
12
1. Temperature or power decrease
2. Temperature or power increase
3. Key On/Off
4. Receiver
5. Led alarm ALC
6. Led alarm ALF
7. Led chrono-thermostat
8. Led temperature ok
9. Led pellets loading
10. Led resistance
11. Display LED 7 segments
12. Led On/Off
Display keys and functions
1. Using the key on the menu Set temperature, you can
decrease the temperature from a maximum value of 40 °C
to a minimum value of 7 °C.
With the key on the menu Set power, you can decrease the
working power from a maximum value of 5 to a minimum
value of 1.
2. Using the key on the menu Set temperature, you can
increase the temperature from a min. value of 7°C to a
max. value of 40°C.
With the key on the menu Set power, you can increase the
working power from a min. value of 1 to a max. value of 5.
3. Keep the key pressed for 2 seconds to switch the stove
on or off.
4. Sensor receiving the settings of the remote control.
5. The led blinks in the event of a malfunction or alarm.
6. The led blinks in the event of a malfunction or alarm.
7. This means the automatic single or daily programming
of the switching on or off of the stove is on.
The automatic programming can be set only with the
remote control (optional).
8. This is on when the stove reaches the set temperature.
In this case you will read the word “Eco” and the set
temperature on the display.
9. This led blinks every time the stove is loading pellets.
10. This led is on only while the stove is lighting up in order
to indicate that the resistance is warming the air which will
fire the pellets.
11. On the display you can read the different working
functions of the stove, the room temperature and the set
working power. In the event of a malfunction, the display
shows the relative error codes (see paragraph on alarm
codes).
12. This led indicates the different phases of the stove:
- it is on if the stove is switched on and working
- it is off if the stove is switched off
- it blinks if the stove is switching off
Stove setting
How to change the wished room temperature
Join the following procedure to change the wished
temperature: press the key
(1) once to enter the menu
and set temperature. You will read the word “Set” and the
wished temperature on the display. Use the keys
(2)
and (3) to increase or reduce the wished value.
The stove will leave the menu Set temperature automatically
as soon as you do not work on it for some seconds.
How to change the working power
Join the following procedure to change the working power:
press the key
(1) once to enter the menu and set the
working power. You will read the word “Pot” and the range
of 5 possible powers on the display. Use the keys
(2)
and (3) to increase or reduce the wished value.
The stove will leave the menu Set working power
automatically as soon as you do not use it for some
seconds.
AL C AL F
1
2
2
3
3
1