background image

27

GB

Charge pellet

Fuel is loaded from the upper part of the stove by opening 
a door.
Pour the pellets in the hopper; vacuum contains about 11 
kg of pellets. This is easier if performed in two steps: 
• Pour half of the contents of the bag into the hopper and 
wait for the fuel to settle on the bottom.
• Then pour in the second half;
• Keep the cover closed , after loading the pellets , the lid 
of the fuel tank;
• Before closing the door load-pellet make sure that there 
are  no  residues  of  pellets  around  the  seal.  If  carefully 
cleaned to avoid compromising the seals.

The stove is a product by heating, presents the external 
surfaces particularly hot.
For  this  reason,  we  recommend  extreme  caution  when 
operating in particular:
• Do not touch the stove body and the various components, 
do not approach the door , it could cause burns;
• Do not touch the exhaust fumes;
• Do not perform any type of cleaning;
• Do not dump the ashes;
• Do not open the ash tray;
• Be careful that children do not come near;

• The device can be used by children that are not less than 
8 years old and people with reduced physical, sensory or 
mental capabilities, or lack of experience or knowledge, 
provided being under supervision of someone responsible 
or after having received instructions relating to the safe 
use of the device and to the understanding of the dangers 
inherent  to  it.  Children  should  not  play  with  the  device. 
Cleaning and maintenance to be performed by the user 
should not be made by children without supervision;

• Do not use the stove as a ladder or scaffold;

•  Do  not  put  clothes  to  dry  on  the  stove. 
Any clothes hangers and suchlike must be kept a suitable 
distance from the stove. - Risk of fire 

•  Carefully  explain  that  the  stove  is  made  from  material 
subjected  to  high  temperatures  for  the  elderly,  the 
disabled, and in particular for all children, keeping them 
away from the stove during operation

• Do not touch the stove with wet hands: the stove has 
electrical  components  that  could  produce  sparks  if 
handled incorrectly.

• Never open the glass door of the pellet stove while the 
stove is in operation.

•  The  stove  must  be  connected  to  an  electrical  system 
equipped with an earthing conductor in accordance with 
regulations 73/23 and 93/98 EEC;

•  The  system  must  be  of  adequate  electrical  power 
declared the stove;

• Do not wash the inside of the stove with water.
The water could damage the electrical insulation, causing 
electric shock;

•  Do  not  expose  your  body  to  hot  air  for  a  long  time. 
Do not overheat the room you are in and where the stove 
is installed.
This  can  damage  the  physical  conditions  and  cause 
health problems;

•  Do  not  expose  to  direct  the  flow  of  hot  air  plants  or 
animals;

• The pellet stove is not a cooking element;

•  External  surfaces  during  operation  can  become  very 
hot.  Do  not  touch  them  except  with  the  appropriate 
protection.

Instructions for safe and efficient use

Never remove the protection grille in the 
hopper. When filling, do not let the sack 
of pellets touch any hot surfaces.

Содержание Mignon 6


























Отзывы: