Kalor Alessia, Руководство пользователя

Страница: 12 / 48

58
GB
Configuration of the hydraulic diagram of the boiler
BY A SPECIALIZED TECHNICIAN
Before starting the boiler, it is necessary to configure the hydraulic scheme on which we want to work. The boiler is set up
to receive the clean contact of an external thermostat (open / closed, the thermostat must not give tension to the back. If
the thermostat carries voltage to the board causing faults, the warranty is void), two temperature probes and a motorized
valve . All these components can be connected via the terminal board on the back of the boiler.
Electrical diagram of the control unit
Per il tecnico specializzato:
To configure the hydraulic diagram, press the SET key and then scroll to the “Technical settings” menu with the
power key. PPress the SET key again to enter the menu and enter the access key in possession of only the technician
authorized by the manufacturer. Confirm the password using the set key and the key
of the power go to menu 3
“hydraulic scheme”. Confirm with the SET key and use the and keys to select the required hydraulic scheme
number.
For end user:
It is possible to change the boiler operating principle according to the season by choosing between summer and winter.
To select the season press SET, the season selection will appear on the display. Then press the set key again and select the
season with keys 1 and 2. Once selected, press the ON / OFF key to exit.
The choice of season changes the boiler operation, see next chapter.