manualshive.com logo in svg

Kalor Ada 28B, Руководство пользователя, Страница: 19 / 54

Поделиться
Скачать
Kalor Ada 28B Скачать руководство пользователя страница 19

67

EN

Following the principles of operation of the various hydraulic diagrams.

Important considerations:
• 

healthcare will always have priority

• 

There are three types of stand-by:

 

Type 01

: the ambient temperature detected by the probe on the board has reached the SET AIR set

 

Type 02:

 the water temperature in the thermostove has reached the SET H2O set

 

Type 03: 

 the external thermostat has detected that the desired temperature has been reached and therefore the 

                         contact is open. 

In this specifi c case the thermostove behaves as follows:

If the thermostat carries voltage to the card causing faults, the warranty will expire.
To confi gure the thermostat, simply remove the jumper on the THERM terminal (see the tab on page 16) and connect our 
room thermostat, OPERATION BY A SPECIALIZED TECHNICIAN.

How to select the type of Stand-by (OPERATION BY A SPECIALIZED TECHNICIAN):

Press the SET button;  press button 

 to go to menu 09. Press the SET button again. Enter the access key and confi rm 

it by pressing the SET key again. Press the 

 key to go to menu 9-5.

The display will show the different stand-by modes mentioned above, choose the mode using the 

 and  

 keys. 

NOTE: The hydraulic scheme 00 is set by default, the WINTER season with stand-by mode 02.
When the stove is switched off manually or by programming, automatic ignitions exit from a stand-by state will not be 
possible.

How to enable or disable the stand-by mode:

Press the SET button. With the

 

 

., key, go to menu 05 and confi rm with the SET key. Use key 

  sto select whether 

to enable (ON) or disable (OFF) the thermostove stand-by function.
Press the ON / OFF button to exit 

 

How to adjust the speed of the room fan:

To adjust the fan speed, keep the button 

 pressed and adjust the desired speed with the same button. To adjust the 

room temperature, see 

point B

 instructions, 

diagram 00

 on the following pages.

Let’s see specifi cally the behavior of the thermostove according to the hydraulic scheme, the presence 
and the stand-by mode and the chosen season

Содержание Ada 28B























































Отзывы:

Нет отзывов