Kalmar DCF100-45E7, Руководство оператора

Страница: 61 / 88

6 Inspection and maintenance – 6.1 Daily inspection 155
• Tyre pressure
• Damage or cracks in vital components and their mountings
such as lifting chains, fork mountings, mast and tilt cylinders
• If the machine is equipped with sidelift; check that sensors for
twistlocks and alignment are clean and free from grease
• Communication equipment – direction indicators, brake
lights, headlights and reflectors with regards to damage
• Cab with regards to damage and dirty windows, rear view
mirrors
2. Check fluid levels for the following fluids according to description,
see section
6.2 Maintenance . Top up, if necessary, with the cor-
rect fluid:
• Hydraulic oil
• Hydraulic oil for brake system
• Batteries’ electrolyte level
• Coolant
• Washer fluid – windows
• Engine oil
• Transmission oil
3. Check that the engine’s indicator for air filter, also check and drain
the fuel prefilter as needed (Volvo engine) and the fuel filter
(Cummins engine). For description, see section
6.2 Maintenance .
4. Start the machine according to instructions and check:
• Instruments – warning lamps, indicators, eventual error codes
on display
• Fuel level – the gauge must not show empty tank
• Lighting, direction indicators, horn, brake lights, flashing haz-
ard lights
• Windscreen wipers
• Check that mirrors are intact, clean and well-adjusted for vis-
ibility all around the machine
DANGER
Cracks in materials or welds in load bearing struc-
tures can reduce the machine’s strength.
Extreme hazard to personal health and risk of proper-
ty damage!
If there are cracks in materials or welds in load-carry-
ing structures/structural elements, the machine must
be taken out of use immediately and taken to service.