Kalmar DCF100-45E7, Руководство оператора

Страница: 43 / 88

5 Handling – 5.3.3 Error code tables 119
For serious transmission malfunctions the control unit uses two modes
with reduced functionality to protect the transmission from damage.
These are:
• "Limp home", GPOS / CPOS in display indicates the letters LH.
In this mode, the operator can use the transmission’s two first
gears in each direction. If the malfunction occurs in a higher gear
the operator has to downshift manually to first or second gear to
continue. The control unit uses standard values for modulation.
• "Shut down", GPOS / CPOS in display indicates the letters Sd.
In this mode the transmission is permanently in neutral as there is
no oil pressure to enable gear selection.
73/01 Solenoid valve VFS 1/3. Control unit transmission activates
"limp home".
STOP: Stop the machine and shift to neutral.
Select reverse gear.
73/02 Solenoid valve VFS 1/3. Control unit transmission activates
"limp home".
STOP: Stop the machine and shift to neutral.
Select reverse gear.
73/03 Solenoid valve VFS 1/3. Control unit transmission activates
"limp home".
STOP: Stop the machine and shift to neutral.
Select reverse gear.
77/02 All gear packs disengaged. Transmission in locked neutral po-
sition ("shutdown").
STOP
80/00 Solenoid valve drive, short-circuiting to ground. Transmission in
locked neutral position ("shutdown").
STOP
80/01 Solenoid valve drive, open circuit or short-circuiting to battery.
Transmission in locked neutral position ("shutdown").
STOP
82/00 Solenoid valve gear selection 1/3, short-circuiting to ground.
Control unit transmission activates "limp home".
STOP: Stop the machine and shift to neutral.
Select reverse gear.
82/01 Solenoid valve gear selection 1/3, open circuit or short-
circuiting to battery. Control uni t transmission activates
"limp home".
STOP: Stop the machine and shift to neutral.
Select reverse gear.
83/00 Solenoid valve drive, short-circuiting to ground. Transmission in
locked neutral position ("shutdown").
STOP
83/01 Solenoid valve drive, open circuit or short-circuiting to battery.
Transmission in locked neutral position ("shutdown").
STOP
90/xx -
99/xx
Transmission malfunction. Transmission in locked neutral
position ("shutdown"). STOP or INFORMATION
95.71 Control unit transmission cannot interpret in-data. STOP
99.90 Incorrect software in control unit. STOP
Description Action
Code