Questions? Problems? For additional assistance, please contact Kallista's Customer
Service Department at 1-888-4KALLISTA (1-888-452-5547) or FAX 1-888-272-3094.
INSTALLATION INSTRUCTIONS
1080629-2-B
Page 2 of 2
P23075
Quincy™ Deck Mount Pot Filler
2. INSTALL THE FAUCET
3. INSTALLATION CHECKOUT
Aerator
Mark the position of the mounting hole at the intended faucet
installation location.
Verify adequate reach of the faucet for your intended use.
Drill a 1-1/8 (2.9 cm) to 1-3/8 (3.5 cm) hole at the marked
location.
Verify the O-ring is installed in the underside of the escutcheon.
If desired, sealant may be applied to the underside of the
escutcheon.
Slide the escutcheon onto the faucet.
Insert the shank through the mounting hole.
Slide a metal washer onto the threaded shank from underneath
the mounting surface.
Thread the mounting nut onto the shank from the underside of
the mounting surface.
Orient the faucet as desired.
Use an adjustable wrench to tighten the mounting nut.
Connect the cold water supply to the shank.
4. EVERYDAY USE
IMPORTANT! The handle closest to the wall must remain in the off position when not in use.
Turn both handles full clockwise to the off position to close the valves.
Verify that all connections are tight.
Twist the aerator counter clockwise to remove it from the spout.
Position a bucket, or other suitable container, beneath the spout.
Turn on the main water supply.
Check all connections for leaks; repair as needed.
Open both faucet valves to run water through the faucet.
Check all connections for leaks; make any adjustments as needed.
Allow water to run through the spout to remove any debris.
Turn off the faucet by closing both valves.
Remove any debris from the aerator and reinstall.
Supply Hose
(Not Provided)
Shank
Mounting Nut
Washer
Faucet
Escutcheon
Washer
Mounting Nut
2-1/8”
(5.4 cm)
Max
