INSTALLATION INSTRUCTIONS
Mirror
1149477_2_A
3 of 3
Questions? Problems? For additional assistance, please contact KALLISTA’s Customer
Service Department at 1-888-4KALLISTA (1-888-452-5547) or FAX 1-888-272-3094.
INSTALL The MIRROR
Anchors
Wall Cleat
Screws
Bottom of Mirror
Mirror Assembly
3-3/8” (8.6 cm)
3-3/8” (8.6 cm)
Hanging Cleat
CL of Mirror
25-5/16”
(64.3 cm)
Determine the location of the mirror. Mark the location of the bottom of the mirror and the centerline of the
mirror.
Measure up 25-5/16” (64.3 cm) from the bottom of the mirror and make a mark on the centerline.
Line up the center of middle hole of the wall cleat with the mark on the centerline.
Make sure the wall cleat is level, and mark the location of the holes.
If any of the holes line up with a stud, drill a pilot hole for the screw. Drill the remaining holes so that the
anchors fit snugly in them.
Insert anchors in holes, tapping lightly with a hammer, if necessary.
Attach the wall cleat to the wall with the screws.
Remove any visible markings from wall.
Gently lower the mirror assembly onto the wall cleat while centering the hanging cleat on the wall cleat.
