background image

INSTALLATION INSTRUCTIONS

Original For Him Dressing Table 

1008300_2_A

5 of 6

Questions?   Problems?   For additional assistance, please contact Kallista’s Customer

Service Department at 1-888-4KALLISTA (1-888-452-5547) or FAX 1-888-272-3094.

 

‰

NOTE:

 If using a lavatory with overflow, ensure that the 

lavatory is installed with the overflow to the front of the marble 

top and dressing table.

 

‰

Install the lavatory and faucet to the marble top at this 

time. Refer to the lavatory manufacturer’s instructions 

for proper lavatory installation. Refer to the faucet 

manufacturer’s instructions for proper faucet installation.

 

‰

With the help of an assistant, place the marble top on top 

of the dressing table. Verify correct fit and alignment of all 

components. Adjust as necessary.

 

‰

With the help of an assistant, carefully remove the marble 

top and set aside.

 

‰

Drill two pilot holes through the mounting rail and finished 

wall on each side of the dressing table. Make sure the two 

pilot holes are spaced a minimum of 16″ (406 mm) apart 

from one another.

 

‰

Tighten a wood screw through each of the two drilled 

holes until the dressing table is flush and secure against 

the finished wall.

 

‰

Apply clear 100% silicone caulk or sealant to the top of the dressing table.

 

‰

With the help of an assistant, replace the marble top on top of the dressing table. Verify correct fit and 

alignment. Adjust as necessary.

 

‰

 

‰

Install the P-trap according to the manufacturer’s instructions.

 

‰

Connect the water supply and check all connections for leaks. Repair as needed.

4. INSTALL The MARBLe TOP

5. COMPLeTe The INSTALLATION

Отзывы: