INSTALLATION INSTRUCTIONS
In-Wall Tank and Carriage
1206758-2-C
Questions? Problems? For additional assistance, please contact KALLISTA’s Customer
Service Department at 1-888-4KALLISTA (1-888-452-5547) or kallista.com.
11 of 12
9. INSTALL THE FINISHED WALL
Cement Board,
24" (610 mm) x
24" (610 mm) Min
Finished Wall
10"
(254 mm)
8" (203 mm)
10"
(254 mm)
2" (52 mm)
Centerline of Outlet
Centerline of Cutout
Install a minimum 24” (610 mm) by 24” (610 mm) piece of cement board with a 10-1/2” (267 mm) by 10”
(254 mm) hole, installed directly behind the bowl and centered over the waste outlet opening.
Install the fi nished wall.
If it is not already installed, install the fl at panel in the fl ush valve opening.I
10. TRIM THE FLUSH SHIELD
Flush Shield
Finished Wall
Utility Knife
Use a utility knife to carefully trim the fl ush shield even with the fi nished wall.
