INSTALLATION INSTRUCTIONS
Freestanding Bath
1271913-2-B
Questions? Problems? For additional assistance, please contact KALLISTA’s Customer
Service Department at 1-888-4KALLISTA (1-888-452-5547) or kallista.com.
4 of 5
2. INSTALL THE BATH
Drain Pipe
Bath Drain
2x4's
Level
Drain
Pipe
Align.
CAUTION: Risk of personal injury. This bath is extremely heavy. Obtain suffi cient help
and
use lifting
straps to carefully lift or move the bath.
CAUTION: Risk of property damage. Make sure the factory-installed drain connections have not become
loose during shipping. Tighten as needed to prevent leakage.
Stack together two 6’ (1.8 m) lengths of 2x4 lumber. Secure each set of stacked 2x4’s together with nails or
screws.
Position the stacked 2x4’s on each side of the drain pipe to temporarily support the bath.
With help, use lifting straps to carefully lift the bath into position on the 2x4’s so the bath drain is over the
pipe.
Carefully reposition the bath as needed so the bath drain is directly over the drain pipe.
Use lifting straps and obtain assistance to remove the 2x4 supports and carefully set the bath on the fl oor.
Adjust the bath position as needed to ensure that the drain pipe is in the center of the bath drain hole.
