INSTALLATION INSTRUCTIONS
Freestanding Bath
1271911-2-
C
Questions? Problems? For additional assistance, please contact KALLISTA’s Customer
Service Department at 1-888-4KALLISTA (1-888-452-5547) or kallista.com.
5 of 5
3. INSTALL THE PLUMBING
Slot
Tab
Bath
Drain Cover
Assembly
Drain
Body
Bath
Drain
Gasket
Drain Pipe
Apply silicone
sealant to
both sides.
Drain
Body
Check for leaks.
Apply sealant.
(optional)
CAUTION: Risk of property damage.
Make sure a watertight seal exists on all bath drain connections.
Make the Drain Connection
NOTE:
The drain cover and gaskets are included in a small box located within the carton.
Choose the thin drain cover for PVC drain pipes or the thick gasket for brass pipes.
Apply silicone sealant to the inside and outside surfaces of the drain gasket to act as a lubricant.
Use a rubber mallet and short section of 1-1/2” PVC tubing to install the drain gasket onto the drain pipe.
Line up the tabs on the drain cover with the slots in the drain body, and insert the drain cover assembly into
the flange.
Press the drain cover several times to make sure the drain opens and closes properly.
Apply Sealant - Optional
If desired, apply a thin, continuous bead of clear or color-matched silicone sealant to the seam between the
bath and the finished floor.
Install the Bath Filler
Install the bath filler according to the faucet manufacturer’s instructions.
Close the bath drain. Fill the bath to the overflow, and check for leaks.
