INSTALLATION INSTRUCTIONS
Wall-Mounted Basin Set
1072016_2_C
3 of 6
Questions? Problems? For additional assistance, please contact KALLISTA’s Customer
Service Department at 1-888-4KALLISTA (1-888-452-5547) or FAX 1-888-272-3094.
INSTALLATION
Spout Shank
Screws
Set Screw
Flange
Gasket
Spout Escutcheon
O-Ring
Spout
Faucet Outlet Port
Install the Spout
ImPORTANT!
Use care when installing the spout to avoid scratching the finish.
Insert the gasket into the back of the spout escutcheon.
Confirm that the O-ring is inside the escutcheon.
Carefully slide the spout escutcheon onto the spout about halfway.
Thread the spout into the spout shank until it is snug. If needed, adjust the spout slightly to position it so it
points straight down.
Secure the spout in place by mounting the flange to the faucet outlet port with the screws provided.
Carefully slide the spout escutcheon and press firmly against the finished wall.
Secure the spout escutcheon to the spout with the set screw.
