INSTALLATION INSTRUCTIONS
Bidet Faucet
1087125_2_B
2 of 5
Questions? Problems? For additional assistance, please contact Kallista’s Customer
Service Department at 1-888-4KALLISTA (1-888-452-5547) or FAX 1-888-272-3094.
ThANk YOU FOR ChOOSINg kALLISTA
We appreciate your commitment to Kallista quality products. Please take a moment to review this manual be-
fore you install your Kallista product. If you encounter any installation or performance problems, please do not
hesitate to contact us at the phone number listed at the bottom of the page.
BeFORe YOU BegIN
The appearance of your product may differ from the illustrations shown in these instructions, however, the
installation procedure is the same.
Prior to installation, unpack the faucet and drain and inspect it for damage. If the product is damaged,
please contact Kallista immediately at the phone number listed at the bottom of the page.
Observe all local plumbing and building codes.
Shut off the main water supply.
Carefully inspect waste and supply tubing for any sign of damage.
Replace waste or supply tubing if necessary.
For new installations, install the faucet before installing the bidet.
Kallista reserves the right to make revisions in the design of plumbing products without notice, as specified
in the Price Book.
TOOLS ANd MATeRIALS
Pipe
Wrench
Plumbers
Putty
Adjustable
Wrench
Thread
Sealant
Hacksaw or
Tubing Cutter
Channel
Lock Pliers
SPRAY ASSeMBLY INSTALLATION
1.
Rubber
Washer
Metal
Washer
Nut
Spray Head
Flange
Shank
Bidet
Remove the spray head and flange.
Thread the nut, metal washer, and rubber washer to the bottom of the
shank.
Apply a ring of plumbers putty or other sealant according to the putty
manufacturer’s instructions.
From the underside of the bidet, insert the shank through the spray hole.
From the top of the bidet, thread the flange onto the shank.
Securely thread the spray head as far as it will go on to the shank.
Thread the flange until it is snug against the spray head.
Securely tighten the nut onto the shank with a wrench. Do not overtighten.
Remove any excess putty or sealant.
