INSTALLATION INSTRUCTIONS
Bidet Faucet
1087125_2_B
5 of 5
Questions? Problems? For additional assistance, please contact Kallista’s Customer
Service Department at 1-888-4KALLISTA (1-888-452-5547) or FAX 1-888-272-3094.
FLeXIBLe hOSe INSTALLATION
7.
Spray Head
Assembly
Shank
Apply
Thread
Sealant.
Plastic
Flexible
Hose
Transfer Valve/
Vacuum Breaker
End Body
Valve
Gasket
Supply
Tee
Nylon
Washer
Rubber
Gasket
Quick-
Connect
Fittings
Apply thread sealant onto the threads of the spray shank.
Connect the flexible hose from the transfer valve onto the
spray shank.
Connect the supply hoses to the supply tee via the quick-
connect fittings.
Insert a rubber gasket and nylon washer into the supply tee
outlet.
Thread a flexible hose into the supply tee outlet.
Slide the gasket onto the transfer valve/vacuum breaker
shank.
Connect the flexible hose from the supply tee outlet onto the
transfer valve/vacuum breaker shank.
SUPPLY CONNeCTIONS
8.
Supply Hose
Supply Hose
Connect the supply hoses from the valve assemblies to the supply
stops. (Left is hot - right is cold).
Tighten all connections.
INSTALLATION CheCkOUT
9.
Spray Head
Spray
Assembly
Connect the tailpiece to the P-trap (as needed).
Ensure that all connections are tight.
Open the drain.
Turn on the main water supply and check for leaks. Repair as needed.
Remove the spray head.
Open both the hot and cold valves and run water through the transfer valve and spray
assembly for about a minute to remove debris. Check for leaks.
Turn off the water.
Reinstall the spray head.
