INSTALLATION INSTRUCTIONS
Deck-Mount Handshower Trim
1213841-2-D
3 of 3
Questions? Problems? For additional assistance, please contact KALLISTA’s Customer
Service Department at 1-888-4-KALLISTA (1-888-452-5547) or kallista.com.
1. INSTALL THE MOUNTING BRACKET
O-Ring
Hose Guide
Hose
Handshower
Handshower
Holder
Escutcheon
Shank
Washer
Nut
Screen Washer
Washer
Washer
Insert the escutcheon shank through the hole of the deck. Ensure the O-ring is in the groove under the
escutcheon.
From underneath the deck, slide the washer and thread the nut onto the shank. Tighten the nut.
Thread the hose guide onto the shank and handtighten.
From the top of the bath or fi nished deck, insert the smaller end of the fl exible hose through the
escutcheon.
From the underside of the bath or fi nished deck, insert one washer into the fl exible hose.
Tighten the fl exible hose onto the water source.
Run cold and hot water through the hoses to fl ush out dirt and debris.
Insert a washer in the top end of the hose and thread the handshower holder onto the fl exible hose.
Insert a screen washer into the handshower holder and thread the handshower handle into the handshower
holder.
To avoid kinking, remove any twists or loops in the hose.
Check for leaks and for smooth operation. Perform any necessary repairs or adjustments.
