Kalley K-LED55UHDCT2, Руководство по обслуживанию, Страница: 21 / 44

Factory Test & Alignment Specification For RT92-AP Series (V1.0)
14
Appendix
Appendix 1: Warm-up Test
Following TCL standard and practices, it’s required minimum 15min
of
Warm-Up
that can be considered
as
Burn-In
. Additional aging for
White Balance
alignment is no more necessary due to consistent picture
performance with cloning usage. This function is acc
essible by selecting “ Factory menu

Warm up ”,
pressing RCU “ Right ” or ” Left ” key to set it ON
, and then it enter in
Warm up
mode. Other faster methods
are available on above enclosed SIACP requirements (rev. v3.9).
Appendix 2: Software Upgrade
How to upgrade Mboot

Connect the computer and mainboard VGA port by a serial port tool.
Serial connector definition: VGA/P403: Pin4: RXD VGA Pin11:TXD

Open RTK “Mboot” software programming tool “
RTICEv4_ Basic tool
”, then click
Burn(a)
and
System option
item to set serial port.

Set the serial port as below, make sure the
common option
is the same to serial port, then click
OK
.

Click
Burn (b)
and you will see the below window. First, choose the bootcore file in the computer,
then click the
Start item and then power on the TV. You’ll see the burning of Mboot.