Kalley K-LED55UHDCT2, Руководство по обслуживанию

Страница: 19 / 44

Factory Test & Alignment Specification For RT92-AP Series (V1.0)
12
Change Project ID in Design Menu

In case of “ Design mode hotkey ” is enabled, press “ Back ”
button to enter
Design Menu
. To modify
Project ID, you need to go through “ Service menu

Project ID ”, then press Left
or
Right
key to
select suitable ID (Project name is dynamically refreshed). Finally restart the TV set.

In case of “ Design mode hotkey ” is unabled, you can enter the Design Menu
easily with reference
to
3.1 Design Menu.
Change Project ID with RCU

Press “ 062598 ”+” Menu ”+” XXX ” (XXX represents project ID you’d like to switch to)
in the remote
control and wait about half an hour, When the set restart automatically, you have successfully
changed project ID.
Here below is none exhaustive ProjectID table for reference:
MODEL ProjectID Panel Name
L40S4690FS 001 LVF400NEAL SJ9W00
L48S4690FS 002 LVF480ND2L CD9W04
L55S4690FS 003 LVF550ND2L CD9W00
4.3 Function Test
Once the Project ID is correct and the TV display normally, plug all external generator devices to relevant
inputs/outputs below according to their respective test patterns format and check picture content and
sound quality accordingly:
Source Test Signal Test Pattern
RF Input
(PAL/DVB/DVB-T2)
RF cable Factory signal
AV
(CVBS)
Chroma/Fluke generator PAL Half Color & Gray bars
VGA
Chroma/QuantumData
generator
1024x768@60Hz
Half Color & Gray bars
YPBPR
Chroma/QuantumData
generator
1080i@60Hz
Half Color & Gray bars
HDMI
(Video & Audio)
DVD with HDMI compliancy Movie 720p@60Hz
LAN
(RJ45)
Ethernet Any network
Audio OUT
RF signal Suitable channel
USB
Video/MP3/Image Home/Media/
SD
Video/MP3/Image Home/Media/
SPDIF
DOSS Audio output
PCMCIA
TV source Suitbale PCMCIA Card