5
The key component is a mother board
(electronic board) placed
inside boxer’s body (block schematics drawing # 1) to which
mechanical elements and user interface components are connected.
Electric /electronic part contains following:
-
measuring mechanism – consists of sending and receiving
diodes that measure blade fly speed thru assembly,
-
verbal information mechanism – built using potentiometer
and speaker, used to send voice messages,
-
punching bag lowering mechanism – consists of ‘START’
button with backlight and electromagnets – actual lowering
mechanism,
-
visual information assembly – assembled out of diodes used
for visual representation of punch force measurement,
warning siren (informs player of breaking top record) also
displays on electronic panel (shows measurement result,
credit amount, top day record),
-
coin acceptor – used to deposit coins (can be reprogrammed
to tokens or other currencies),
-
bill acceptor – used to deposit bills (option),
-
mother board.
4.
Transport
Machine should be transported in vertical position. Machines are
shipped on a 34” x 50” wooden palette, and sides are covered with
special (~3/8”) thick 93” tall (from the bottom of the pallet) multi-
layer cardboard. The total weight of the box is approx. 290 lbs.
After the machine is taken out of the box, it should be transported in
horizontal position with the help of two wheels. Machine can, in
special cases (exp. if it does not fit in doorway), be taken apart and
then reassembled. This procedure should be done by a specialist or
someone familiar with all technical information.
