30
ILLUMINATED START BUTTON
The illuminated START button is connected with both, the white and
the red connectors. The red connectors are stick on the sides, while
the whites are on the back and upper side of the button. See the photo
below for the proper connection.
The red connectors are for the lights, the white connectors are for the
button itself.
Replacement procedure.
Unscrew the button (its nut). Unlock the white part of the button
(illuminated version only). Disconnect all wires. Pull out the button
from the assembly hole. Replace with the new button using the above
instructions.
Red connectors
White connectors