Kalkhoff Bosch Active Line Скачать руководство пользователя

Страница: 223 / 230

English–

0 276 001 SAI | (14.8.13)

Bosch eBike Systems

Gathering First Experience

It is recommended to gather first experience with the eBike

away from roads with heavy traffic.
Try out the different assistance levels. As soon as you feel

safe, you can participate in traffic with the eBike as with any

other bicycle.
Test the operating range of your eBike under different condi-

tions before planning longer and more challenging rides.

Influences on the Operating Range

The operating range depends on many factors, such as:
– Assistance level,

– Gear-switching behaviour,

– Bicycle tyres and tyre pressure,

– Age and condition of the battery pack,

– Route profile (inclines) and road or path conditions (road

or path surface),

– Head wind and ambient temperature,

– Weight of the eBike, rider and equipment/luggage.
For this reason, it is not possible to precisely predict the

range before commencing a trip. General rules:
– For

the same

motor output of the eBike drive: The less

power or force that you have to bring about to reach a cer-

tain speed (e.g. through optimal use of the gears), the less

energy the eBike drive will consume, and the greater the

range for a battery-pack charge.

– The

higher

the assistance level under otherwise same con-

ditions, the lower the range.

Careful Handling of the eBike

Please observe the operating and storage temperatures of the

eBike components. Protect the drive unit, HMI and battery

pack against extreme temperatures (e.g. from intense sun-

light without adequate ventilation). The components (espe-

cially the battery pack) can become damaged through ex-

treme temperatures.

Maintenance and Service

Maintenance and Cleaning

Keep all components of your eBike clean, especially the bat-

tery-pack contacts and corresponding holder contacts. Clean

them carefully with a soft, damp cloth.
All components including the drive unit may not be immersed

in water or cleaned with a high-pressure cleaner.
For service or repairs on the eBike, please refer to an author-

ised bicycle dealer.

After-sales Service and Customer Assistance

In case of questions concerning the eBike system and its com-

ponents, please refer to an authorised bicycle dealer.
For contact data of authorised bicycle dealers, please refer to

www.bosch-ebike.com

Transport

The battery packs are subject to the Dangerous Goods Legis-

lation requirements. Private users can transport undamaged

battery packs by road without further requirements.

When being transported by commercial users or third parties

(e.g. air transport or forwarding agency), special require-

ments on packaging and labelling must be observed (e.g. ADR

regulations). If necessary, an expert for hazardous materials

can be consulted when preparing the item for shipping.
Dispatch battery packs only when the housing is undamaged.

Tape or mask off open contacts and pack up the battery pack

in such a manner that it cannot move around in the packaging.

Inform your parcel service that the package contains danger-

ous goods. Please also observe the possiblity of more de-

tailed national regulations.
In case of questions concerning transport of the battery

packs, please refer to an authorised bicycle dealer. Bicycle

dealers can also provide suitable transport packaging.

Disposal

The drive unit, HMI (incl. operating unit), battery

pack, speed sensor, accessories and packaging

should be sorted for environmental-friendly recy-

cling.

Do not dispose of eBikes and their components into house-

hold waste!

Only for EC countries:

According to the European Guideline

2012/19/EU, electrical devices/tools that

are no longer usable, and according to the

European Guideline 2006/66/EC, defec-

tive or used battery packs/batteries, must

be collected separately and disposed of in

an environmentally correct manner.

The integrated battery pack in the HMI may only be removed

for disposal. Opening the housing shell can damage or de-

stroy the HMI.
Please return battery packs that are no longer usable to an

authorised bicycle dealer.

Li-ion:

Please observe the instructions in sec-

tion “Transport”, page English–7.

Subject to change without notice.

OBJ_BUCH-2074-001.book Page 7 Wednesday, August 14, 2013 12:19 PM

Содержание Bosch Active Line







































































































































































































































Результаты поиска

Содержание Bosch Active Line

Отзывы:

Похожие инструкции для Bosch Active Line

Бренды по названию

Популярные бренды

Kalkhoff Bosch Active Line, Оригинальное руководство пользователя

Результаты поиска

Содержание Bosch Active Line

Отзывы:

Похожие инструкции для Bosch Active Line

Бренды по названию

Популярные бренды