Kalfire W60/51Fl, Руководство по установке и инструкции

Страница: 37 / 55

6.6 Optimal heat output
once you have the fireplace lit and it is at a comfortable
temperature, observe the following instructions for optimal heat
output (this will achieve comparable performance and emission
values as obtained during the inspections of the Kalfire w):
•
ensure a glowing bed is created (see section 6.5).
•
use logs of wood of approximately the same size. The
amount differs per fireplace model, see the table below.
rule of thumb: 1 kg of wood provides about 4 kw of energy.
The fireplace is suitable for discontinuous use. This is achieved by
burning according to Table 7.
Table 7: instructions for optimal burning per model
*weight for beechwood
6.6.1 Topping up with wood
as soon as the fireplace is at a comfortable temperature
(see section 6.5), you can replenish the wood in the fireplace.
To achieve optimal heat output:
•
top up the fire with new wood as soon as the flames
have disappeared and the logs are beginning to glow
(no smoke development).
•
open the door slowly to prevent smoke escaping into
the room because of the sudden draught.
•
do not add more than 2 to 3 logs (for maximum weight,
see Table 6).
place the logs as follows:
Kalfire W45/48F
place the two logs into a v-shape. The Kalfire w45/48f can be
used both as an open or a closed fireplace.
remove both baffle plates before using the fireplace with the door
open, to enable correct exhaust of the flue gas.
Kalfire type W45/48F W53/50R W60/51F W70/33F W71/62F W85/40F W100/61F
Weight* per log (g) 850 950 850 730 1000 850 1200
Number of logs 2 3 3 3 3 3 3
Max. weight of wood per hour (kg) 2.3 2.85 3.6 2.9 5 4 3.6
Air regulation open (%) 100 45 100 75 50 100 60
Kalfire type W65/38C W66/48S W80/52T W90/47C W90/47S W105/47F W105/47T
Weight* per log (g) 950 975 850 850 1400 1300 1100
Number of logs 3 3 4 4 3 3 4
Max. weight of wood per hour (kg) 4 3.5 4.5 4 5.5 4.6 5
Air regulation open (%) 30 25 90 10 50 100 50
37