Kalfire E Series, Инструкция по установке и эксплуатации, Страница: 20 / 32

20
5
E-SERIES OPERATION
With the E-series you can create your own fire
experience through the various functions and/or
options.
WARNING!
When the heating is turned on for the first time, the
product may emit an odor. This odor will disappear on
its own.
Main On/Off Switch
Power to the fireplace can be switched ON/OFF using
the on/off switch (0/I) on the front. The button is
located at the bottom right of the E-box right under
the design bottom plate.
IMPORTANT!
If you do not intend to use the unit for a long period
of time, we advise you to switch off the unit by setting
the power button on the unit to the 0 (off) position.
Remote Control Pairing
IMPORTANT!
The remote control must be paired to start using the
fireplace. The following pairing symbol will be visible
on the screen to ensure the remote control has not
been paired yet.
Pairing the remote control:
Press button 4 and 5 on the remote control at same
time. Release the buttons when a red LED light flashes
in the top-left corner of the remote control.
You will know when the remote control is paired with
the E-series successfully once the pairing symbol is no
longer visible.
Remote and Symbols
1. Intensity log/ember bed
2. Flame selection up
3. Kalfire sound - volume down
4. Dynamic light nr. 1 and nr. 9
(last selected)
5. Heater