Kalfire E Series, Инструкция по установке и эксплуатации, Страница: 17 / 32

17
 Mount the supplied clamps with the supplied
screws to the bottom of the Design frame at the
marked points. Tighten them with a screwdriver.

Next, take the assembled LED profile and click it
into the mounted clamps. Place it centered on the
product and push the cable of the LED strip
through the hole at the bottom.
4.4.3
Continuation - Installation of the Design
Frame and the Fireplace
5.
Place the unit (without the Design bottom with
logs) into the Design Frame. Ensure the frame is
placed on a stable surface.
PAY ATTENTION!
It is recommended to place the power cable on the
bottom shelf of the Design Frame to ensure that
power can be connected to complete the installation.
6. Use the 2x 3.5x16mm cross-head countersunk
screws with pozidriv and screw them into the legs
to secure the fireplace to the frame.
7. (Optional) If a LAN cable is desired, insert the
LAN/network cable (not included) at the back of
the fireplace before hanging the fireplace on the
wall brackets.
1.
Next, lift the Design Frame with the fireplace and
hang it onto the wall brackets. Make sure to lift
the frame while holding the Design Frame. It is
advised to place the power cable on the bottom