Kalfire E Series, Инструкция по установке и эксплуатации, Страница: 11 / 32

11
template out with the surface on which the
product is placed and hang on the wall using tape.
WARNING!

provided wall anchoring brackets are not suitable
for wall mounting the fireplace, only for anchoring
the fireplace and providing additional safety
against tipping.
 The bottom of the fireplace has to be supported
at all times.
2. Once marked, install the wall anchors by referring
to the standard installation conditions for each
wall type.
IMPORTANT!
If you are not sure about your wall type, please ask an
expert or your local DIY store for assistance.
A. Dry Wall, Masonry, or concrete wall:
Use the provided UX6 plug and 4x45mm cross
recessed countersunk head screw pozidriv
3.
Drill 4x 6mm holes and insert the plugs. Use the
supplied screws to attach the wall anchors to the
wall. Make sure they are level.
B. Wooden frame:
3.
Screw 4x45mm screws directly into wooden frame
IMPORTANT!
If a LAN cable/network cable (not included) is desired,
place the fireplace on the furniture where it will be
situated and connect it to the back of the fireplace
before hanging the fireplace on the wall anchors.
4.2.2
Installing the fireplace
1. Connect the fireplace to power. Insert the power
cable into the plug on the right side the product
first, then plug the cable into the socket.