LDM 500-80
+
ENGLISH
© KALEAS GmbH & Co. KG
35
2x
short
The segment measurement is activated.
Display [6]
Display [2]
Last segment distance used
1x
short
Setting the desired segment distance
Every time the buttons are pressed, the value is
increased / decreased by the smallest set unit.
If you continuously press the buttons, the value to be
set is changed more quickly.
1x
short
Applying the set segment value
The laser [B] is activated, and the continuous segment
measurement is started.
Display [4]
Distance from the next multiple of
the set segment value
Display [2]
Set segment value
Display [3]
Next multiple
of the set segment value
1x
short
Restarting the segment measurement
It is essential that you observe the set reference and do not change
it during the entire procedure.
The computed result may also be greater than 80 m.
Addition (Plus)
The addition can be carried out with any of the units of measure-
ment (length, surface area, volume). You can also include the
measurement results of functions (surface area, volume, Pythago-
ras) in the addition. Only values of the same unit can be added. The
unit is established by the first measured value.
If the result of an addition is stored in the measured value memory,
the individual values of the sum are also stored.
The computed result may also be greater than 80 m.
1x
short
Measuring value 1 (distance/surface area/volume)
Display [4]
Value 1
1x
Initiating an addition
