KALATEL CBR-KB3, Инструкция по установке и эксплуатации

Страница: 31 / 38

Installation and Operation Manual
Revision B 5-9 0150-0133
<SEQ>--NEXT <1>--number 01 <6>--number 06 <IRIS CLOSE>
<FRZ>--PREVIOUS <2>--number 02 <7>--number 07 <IRIS OPEN>
<ENTER>--SET <3>--number 03 <8>--number 08 <ZOOM OUT>
<ALARM>--HELP <4>--number 04 <9>--number 09 <ZOOM IN>
<MENU> <5>--number 05 <10>--number 00
®
<FOCUS NEAR>
<AUX 1> <AUX 2> <AUX 3> <AUX 4> <JOYSTICK>
-
<FOCUS FAR>
¬
All other KB3 keys when pressed, will display this
message on the LCD: Not a valid key
in menu mode!
-
When certain CyberDome menus are displayed, the joystick function is used to navigate the
menu and no longer controls the customary Pan/Tilt/Zoom functions.
®
The CBR-KB3 does not have a ZERO (0) key, so the TEN (10) key is given this function.
Accessing the Kalatel CyberDome Programming Menu
The KB3 should be in the Telemetry mode. If it is not, press the Telemetry key on the KB3 keypad.
Then press the camera number for the CyberDome to be programmed.
NOTE: The camera selection can only be accessed in Telemetry mode, not in MENU mode.
In the MENU mode, the
camera keys are used for entering numerical data and do
not function as camera selection buttons.
At this point, the user can now access the CyberDome menu system as follows:
1.
Press the MENU key
once.
The KB3 LCD displays:
KALATEL MENU
Camera 002
2.
The Monitor displays the default
menu, part of which shows:
( _ _ is for your selection)
SHUTTER SPEED
-- SITE 003 --
1/1000S <0>
. .
. .
. .
1/4S <5>
ENTER SELECTION: _ _
<ALARM>-HLP <SEQ>-NEXT
3.
Press the SEQUENCE
key.
The KB3 LCD displays (1 second):
<SEQ>-NEXT
4. The Monitor displays:
The next CyberDome menu
page.
5. Press the FREEZE key. The KB3 LCD displays (1 second):
<FRZ>-PREVIOUS
6. The Monitor displays:
The previous CyberDome menu
page.