KALATEL CBR-KB3, Инструкция по установке и эксплуатации

Страница: 24 / 38

Installation and Operation Manual
0150-0133 5-2 Revision B
To connect to a new multiplexer unit, the Keyboard has to be in the
Standing by ...
state.
Some Examples:
Suppose the user wants to connect to Unit 5. When the connection is successful, the steps are:
1.
Press the
#
key once.
The display shows:
Enter a Target
Unit ID ...
2.
Press a numeric key,
in this case 5 .
If unit 5 is available (i.e. not
controlled by another keyboard),
the CBR-KB3 display shows:
Trying to connect ...
this is quickly followed by:
Connected ...
(32
→ →
05)
The CBR-KB3 is now in the
Connected ...
state.
Suppose the user wants to connect to Unit 5. When the connection is not successful, the steps are:
1. Press the
#
key once.
The display shows:
Enter a Target
Unit ID ...
2.
Press a numeric key,
in this case 5 .
If there is no unit 5 connected to
the network, the CBR-KB3
display shows:
Unit is not
on the network
this is quickly followed by:
Standing by ...
(32 | ??)
The CBR-KB3 remains in the
Standing by ...
state.
If the user picks the ID used by the CBR-KB3 itself, the display
shows: Cannot connect
to Myself!
If the chosen unit number is connected to the network, but is
being controlled by a different CBR-KB3, the display shows: That unit is
already in use!
If the chosen unit number is that of another CBR-KB3, the
display shows: Cannot connect
to a keyboard!
Automatic Network Polling
After power up, the keyboard starts polling the network to establish which units, if any, are connected
to the network. The top line of the display shows:
Polling Units
. The bottom line of the display
indicates which of the 32 network ID numbers are being polled.
If the keyboard detects a controllable unit (multiplexer) on the network, it tries to connect to the first
available unit (lowest network ID), and goes to the
Connected ...
state.
NOTE:
The keyboard does not detect Multiplexers that are not powered on. The
network address (network ID) of each network device, such as a multiplexer or
a keyboard, is set in that device. Refer to the corresponding device manual to
set up its network address.