background image

 Operation Manual                                                                                                                  TR-40

Model TR-40

— 2 —

SAFETY RULES

1. Wear proper apparel. Do not wear loose 

clothing, gloves, neckties, rings, bracelets or 

other jewelry which may get caught in moving

parts of machine.

2. Wear protective hair covering to cover long 

hair.

3. Wear safety shoes with non-slip soles.

4. Wear safety glasses complying with United 

States ANSI Z87.1.

Everyday glasses have only impact resistant 

lenses. They are NOT safety glasses.

5. Be alert and think clearly. Never operate 

tools when tired, intoxicated or when taking 

medications that cause drowsiness.

6. Keep work area clean. Cluttered work areas 

invite accidents.

7. Work area should be properly lit.

8. Keep visitors at a safe distance from work 

area.

9. Keep children out of workplace. Make 

workshop childproof. Use padlocks to prevent 

any unintentional use of tools.

10.

Assemble only according to these 

instructions.

 Improper assembly can create 

hazards.

11.When tools are not in use, store them in a 

dry, secure place out of the reach of children. 

Inspect the tools prior to storage and before 

reuse.

12. Maintain product labels and nameplates. 

These carry important safety information.

Assembly

The Tube Roller must be securely mounted 

to a solid surface before using, the size of the 

mounting hole is 11 mm. 

Operating the tool for certain operations will 

SAVE THESE INSTRUCTIONS

Thank you for purchasing TR-40 Tube Roller 

machine. Before attempting to operate your 

new tool please read these instructions 

thoroughly. You will need these instructions for 

the safety warnings, precautions, assembly, 

operation, maintenance procedures, parts list 

and diagrams.c Keep your invoice number 

with these instructions. Write the invoice 

number on the inside of front cover. Keep the 

instructions and invoice in a safe, dry place for 

future reference.

General Safety Information

WARNING

For your own safety, read all of the 

instructions and precautions before 

operating tool.

CAUTION

Always follow proper operating procedures 

as defined in this manual even if you are 

familiar with use of this or similar tools.

Remember that being careless for even a 

fraction of a second can result in severe 

personal injury.

WARNING

The warnings, cautions, and instructions 

discussed in this instruction manual 

cannot cover all possible conditions or 

situations that could occur.  It must be 

understood by the operator that common 

sense and caution are factors which 

cannot be built into this product, but 

must be used by the operator.

Содержание TR-40









Отзывы: