Kaivac OmniFlex TROLLEY BUCKET, Руководство оператора и каталог запасных частей

Страница: 22 / 32

kaivac
cleaning
systems
TM
kaivac
cleaning
systems
TM
1-800-287-1136
Customer/Technical Support
P a g e ǀ 2 2
3.5 e
Mptying
v
aCuuM
t
ank
3.0 Operation
If the Vacuum Motor shuts off before the job is complete, the Vacuum Tank may be full and need to be
emptied. Lift the Vacuum Motor to check liquid level inside the Vacuum Tank. If unit is full or your job is
complete, follow the instructions below to empty Tank into appropriate sink/drain.
Once cap is removed, lower Dump Hose into ap -
propriate sink/drain. To prevent an accidental spill
or overflow from the Dump Hose, be careful to
keep hose end upright until it is over sink/drain.
TIP: With Dispense-and-Vac, you can extend your cleaning range
with the following procedure:
1. Thoroughly clean Vacuum Tank.
2. Fill Vacuum Tank and Trolley-Bucket with diluted cleaning
solution.
3. Dispense solution onto floor.
4. When Trolley-Bucket is out of solution, use �ump �ose to refill
Trolley from Vacuum Tank.
5. Continue Dispensing.
To begin the dumping process, you must
first press down on the Cap and turn
counter-clockwise
Dumping from
Vacuum Tank to
Trolley-Bucket
PRESS
DOWN
TURN