Kaivac OmniFlex TROLLEY BUCKET, Руководство оператора и каталог запасных частей

Страница: 19 / 32

kaivac
cleaning
systems
TM
kaivac
cleaning
systems
TM
www.kaivac.com
©2017 Kaivac, Inc. All Rights Reserved
P a g e ǀ 1 9
Cleaning with OmniFlex Dispense-and-Vac mode is better, safer and faster than cleaning with a mop. You
apply fresh cleaning solution to the floor, spread and lightly brush into grout lines, then vacuum away all
soils and liquids.
After the unit has been filled with the appropriate
amount of water/solution, turn the Spigot handle
counter clockwise to MAX position. Beginning at the
rear of the area, begin dispensing solution, moving to-
wards the front of the area.
Beginning at the rear of the area, begin dispensing solu
-
tion, moving towards the front of the area. Park unit so
that it blocks entry to area.
Turn Vacuum Motor to ON. Attach Vacuum Wand to
Vacuum Hose (if not already connected).
Slap & Tap:
Once Vacuuming is complete, keep motor
running. Slap Vacuum Wand on floor 3-4 times to dislodge
debris from squeegee head. Then, invert Wand and Tap 4-5
times to dislodge any fluids or substance from Wand.
Vacuum floor surface diagonally to grout lines, reaching
under shelves, seating etc.
Then Turn OFF Motor.
Turn Spigot clockwise to the OFF position. Use
Spreader Tool in back-and-forth motion to cover
floor with cleaning solution. *
Agitate Spreader Tool over
troubled or extra soiled areas to get a deeper clean
*
3.2 d
ispense
-
and
-v
aC
o
peRation
3.0 Operation
Back
of
area
Front
of
area
Slap!
End
Start
Back
of
area
Front
of
area
Tap!
Slap!