14
EN
INSTALLATION INSTRUCTIONS
ELECTRICAL CONNECTION
Before connecting the appliance to the mains
power supply, make sure that:
•
The supply voltage corresponds to the
specifications on the data plate on the front
of the appliance.
•
The mains supply has an efficient ground
connection complying with all applicable
laws and regulations.
Correct grounding is a legal requirement. If the
appliance is not pre-fitted with a power cable
and/or plug, use only suitable cables and plugs
capable of handling the power specified on the
appliance's data plate and capable of resisting
heat. The power cable should never reach a
temperature 50 °C above ambient temperature at
any point along its length.
If the appliance is to be connected directly to
mains terminals, fit a switch with minimum
aperture of 3 mm between the contacts. Make sure
that the switch is of sufficient capacity for the
power specified on the appliance's data plate, and
compliant with applicable regulations. The switch
must not break the yellow-green earth wire. The
socket or switch must be easily reachable with the
appliances fully installed.
Attention!
The manufacturer declines all
responsibility for damage or injury if the
above instructions and normal safety
precautions are not respected.
Attention!
Installation and electrical
connection must be made by a qualified
expert only.
