140
EN
TABLEWARE WARMING DRAWER
INSTALLATION
•
Open the drawer and take out all the
spare parts and remove the packing
material.
•
Make sure that the warming drawer is not
damaged in any way. Check that the
drawer opens and closes correctly. If you
find any damage, contact the Technical
Assistance Service.
•
Make sure that the power socket is easily
accessible after the devise has been
installed.
The warming drawer could be built-in as in
combination with an ofen
Kaiser
, so as in
standalone mode.If it is fitted in combination with
appliances of other manufacturers, the guarantee
is no longer valid since it is impossible to
guarantee that the drawer will work correctly.
To build-in the crockery warmer in combination
with another appliance there must be a fixed,
interim shelf in the housing unit to support the
weight of both appliances.
The appliance to be combined with the crockery
warmer will be placed directly on the latter without
any need to have a separating shelf.
•
Fasten the devices among themselves
with help of the applied plates.
•
Place the appliances on the shelf and
completely line up with the front of the
units.
•
Check that the appliances are properly
levelled and is sitting evenly on the shelf.
•
Open the drawer and fix the warming
drawer to the sides of the unit using the
two screws provided.
Attention!
The front surface of the warming
drawer may be wrapped in a protective film.
Before using the devise for the first time,
remove this film carefully.
Attention!
Installation and ellectrical
connection must be made by a qualified
expert only.
Attention!
The manufacturer declines all
responsibility for damage or injury if the
above instructions and normal safety
precautions are not respected.