mini
Photo
Scanner
User Manual mini
Photo
Scanner
Troubleshooting
Q. There are lines on the scanned image or the image is not clear
A.
Check the following –
Are there scratches on the original print? Remove any stains or dust
before scanning
Has the scanner been used for a long period of time without cleaning or
calibration? Follow the instructions for cleaning and calibrating the scanner
and try again
Q. The photo/document gets stuck halfway in the feeding slot
A.
Press the power button, the scanner will back out the photo/document
so you can remove from the output slot
Q. The LED light blinks rapidly and no scan is possible
A.
Check the following –
Is the SD card inserted properly into the SD card slot?
Re-insert and try again
Is the SD card locked or write protected?
Unlock the SD card and try again
Q. Is the memory card full?
A.
The LED indicator blinks when the free space on the memory card is below
1MB. Delete some files or use a different SD card
Make sure the file format is FAT or FAT32. Do not use NTFS
Q. The scanner feels warm to the touch
A.
It is normal for the scanner to emit a small amount of heat after prolonged
use. If there are strange odours coming from the device or it feels hot to
the touch, disconnect the power immediately from the power supply
pg10