MEASUREMENT PROCEDURES
5. Display Mode Setting
Select how the chosen measurement will be shown in the display.
①
Press VIEW Key under the instrument is ON. Pull down menu will open
with the current setting highlighted.
②
Press VIEW Key repeatedly until the desired setting is highlighted.
③
Wait until the menu closes. The new setting is displayed on the screen.
Comparison view
This view is useful to compare the sets of minimum, average,
and maximum values between several cylinders.
Chart (i.e. trend line) view
Displays the measurement value as the time-series chart.
This view is useful to check the variability over time.
Digital view
This view provides digital and analog readouts for the selected
measurement, as well as the other two digital readouts.
Waveform (i.e. oscilloscope) view
This view displays the signal amplitude over time (like an
oscilloscope). Useful for visually checking.
-10
10
20
kv
-4
-2
0
2
ms
0
01607
RPM
Chart
Comparison
Digital
Waveform
Display mode
selection menu
16
