1. Remove the continuous drain cap 1 by turning it counter clockwise then remove
the rubber stopper 2 from the spout.
2. Screw the drain connector to(included
in the package) the spout by turning
clockwise.
3. Insert the drainage hose into
drain connector.
ATTENTION:
Removing Collected Water
When using continuous drainage option from the middle hole, place portable
on a level surface and make sure garden hose is clear of any obstructions
and is directed downward. Placing portable on an uneven surface or
improper hose installation may result in water filling up the chassis and
causing the unit to shut off. Empty water in the chassis if shut off occurs,
then check portable location and hose for proper setup.
Note:
Water can be automatically emptied into a floor drain by attaching 14mm inner
diameter hose (not included).
Use the continuous drainage option from the middle hole
2
4
2
● Turn the unit off and unplug from the electrical outlet.
● Use a small pan or move the unit to a suitable place to drain the water.
● Take the drainage pipe from the clip and pull out the rubber plug on the drainage
pipe to drain the water.
● Drain the water into the small pan or a suitable place.
● Once draining is complete,re-install drain cap.
● Press ON/OFF button to restart the unit.
Removing Collected Water
1
. In Cool or Dry mode operating, the condensation water will be drained to the chassis.
To empty the chassis, please follow the instructions bellow.
2
. When the chassis is full with water, the buzzer will give out 8 sounds and "H8" is
displayed to remind user to discharge water,the unit will turned off about 2min latter,
and all buttons are invalid.
■ Drainage way as follows.
23
EN
75
Содержание KPC-09AK29
